Arduino Nano Expansion Board

Good afternoon everyone!
I offer to your court a review of a mini review (just look) of the adapter board for arduino nano
Sometimes you have to connect the Arduino to devices that have terminals or just wires hanging at the output. You have to invent something as an adapter or just solder the wires to the arduino legs.
And here, during the next visit to Ali, I saw in the recommendations just such a transition https://jiji.sn/cars/gmc-acadia-2013 scarf, the price is small, so I decided to take a look.
The handkerchief arrived disassembled (it’s 29 cents cheaper ah)

The size of the board is 55 mm long

35 mm wide https://jiji.sn/region-de-dakar/watches/omega

In the center there are a couple of holes for attaching to the case

All pins are signed both from the arduino side and next to the terminal blocks, so you won’t have to guess which pin goes where.

After assembly, I got such a scarf with an arduino connector and screw terminals, in my opinion it is convenient and compact.

The height with the Arduino installed is about 25mm, provided that the ICSP comb is soldered to the controller

A small conclusion: In my opinion, it turned out to be quite a convenient and useful thing. Of course, it is far from always and often needed, but I bought a couple of things for myself.

I apologize in advance for the spelling and grammar of the text, all the mistakes made were not made on purpose, but only out of ignorance and due to the imperfection of automatic text checking programs.